RobotClean S1, autonomous floor scrubbing robot

Professional robot that scrubs, sweeps and vacuums at the same time, with Laser SLAM and V-SLAM navigation, LiDAR and a 3D camera. 15 l water tank and 6–10 hours of operation per charge.

  • Scrubbing, sweeping and vacuuming at once
  • 6–10 hours of operation per charge
  • Maps of up to 40,000 m²

Smart, fully automated cleaning

RobotClean S1 combines Laser SLAM and V-SLAM technology to navigate and position itself precisely, even in buildings with a complex layout. The LiDAR sensor and 3D camera read the surroundings in detail and help the robot avoid collisions.

You can schedule cleaning tasks by time, and when the battery runs low the robot returns to its charging station on its own. Nobody has to start it, guide it or plug it in.

Scrubs, sweeps and vacuums at once

All three jobs happen in a single pass, along an optimised arc-shaped route that follows the walls. The whole surface is covered, with no missed spots and no repeated passes.

The 386 mm sponge-like absorbent polymer roller cleans gently and does not overwet the floor. The surface is dry right after cleaning, so it can be used straight away.

The UVC ultraviolet disinfection system sanitises the scrubbing module and the floor for a higher standard of hygiene.

High autonomy and precision

The 3D obstacle recognition system brings together the LiDAR sensor, the 3D camera and optical contact protection. The robot manoeuvres safely and precisely, even in crowded or furnished spaces.

  • LiDAR with a range of up to 25 m for a detailed view of the surroundings
  • 3D camera for obstacles in front of the robot
  • Optical sensor that stops the robot and changes its direction on contact, so it causes no damage

Remote control and easy maintenance

From the remote control platform you create navigation maps in real time, plan multiple zones, assign different cleaning tasks on the same floor and control the robot from anywhere.

The modular design keeps upkeep quick: the dust box and water tank pull out easily, and the sponge part of the roller can be swapped in minutes. Smart alerts tell you when maintenance is due, when a fault occurs or when consumables need replacing.

Technical specifications

The key figures for RobotClean S1 at a glance.

CE certified: meets European safety and environmental requirements.

Technical specifications – RobotClean S1
FunctionsScrubbing, sweeping and vacuuming at once
NavigationLaser SLAM + V-SLAM, LiDAR and 3D camera
LiDAR rangeup to 25 m
Laser mappingup to 40,000 m²
Water tank15 l
Scrubbing roller386 mm, absorbent polymer
Maximum suction power250 W
Cleaning speed0.1–0.5 m/s (adjustable 0.2–0.4 m/s)
Minimum passage width900 mm
Battery25 Ah / 38.4 V
Runtimeapprox. 6–10 hours
Charging timeapprox. 6 hours
ChargingAutomatic return to the charging station
SanitisingBuilt-in UVC disinfection
Cleaning routeArc-shaped, along the walls
Dimensions (L × W × H)670 × 490 × 600 mm
CertificationCE

Figures as declared by the manufacturer. Results may vary depending on the floor and settings.

Where RobotClean S1 works

Built for large, high-traffic areas where floors need cleaning every day to the same standard.

  • Shopping malls and retail centres

    Galleries, halls and busy walkways.

  • Airports

    Terminals, check-in and boarding areas.

  • Railway and metro stations

    Waiting rooms, passages and transit areas.

  • Hospitals and clinics

    Corridors and halls sanitised with UVC.

  • Care homes and social care centres

    Consistent hygiene for vulnerable people.

  • Office buildings

    Receptions, open-plan areas and corridors.

  • Hotels

    Lobbies, halls and common areas.

  • Warehouses and logistics centres

    Wide aisles and industrial floors.

Let's talk about your space

Fill in the form or contact us directly. The more you tell us about the building, the more accurate our recommendation will be.

We usually reply within one working day.

Send us a message

Fields marked with * are required.

Message us on WhatsApp