RobotClean S1, autonomous floor robot

Floors scrubbed, swept and vacuumed in a single pass

The robot maps the building by itself, cleans on the schedule you set and returns to its charger when the battery runs low. Built for large commercial and public spaces.

  • Scrubbing, sweeping and vacuuming at once
  • 6–10 hours of operation per charge
  • Maps of up to 40,000 m²

+40 757 467 775 WhatsApp

Illustration: the robot's arc-shaped route along the walls on a building map
  • LiDAR up to 25 m
  • No overlapping passes
RobotClean S1 cleaning robot with the RobotClean logo

Three jobs in a single pass

The robot scrubs, sweeps and vacuums at the same time, following an arc-shaped route along the walls that covers the whole floor without passing over the same spot twice.

  • Scrubbing without puddles

    The 386 mm absorbent polymer roller cleans gently and picks up the water. The floor is dry right after the robot passes.

  • Sweeping

    Collects dust and debris along the entire route, including along the walls and into corners.

  • Up to 250 W suction

    Debris goes into a removable dust box that is easy to empty.

  • UVC disinfection

    Built-in ultraviolet light sanitises the scrubbing module and the floor for a higher level of hygiene.

Where RobotClean S1 works

Built for large, high-traffic areas where floors need cleaning every day to the same standard.

  • Shopping malls and retail centres

    Galleries, halls and busy walkways.

  • Airports

    Terminals, check-in and boarding areas.

  • Railway and metro stations

    Waiting rooms, passages and transit areas.

  • Hospitals and clinics

    Corridors and halls sanitised with UVC.

  • Care homes and social care centres

    Consistent hygiene for vulnerable people.

  • Office buildings

    Receptions, open-plan areas and corridors.

  • Hotels

    Lobbies, halls and common areas.

  • Warehouses and logistics centres

    Wide aisles and industrial floors.

How it works

From the first conversation to everyday cleaning, there are four steps.

  1. We assess your space

    We talk about the building, the floor type and your cleaning schedule, then recommend the right setup.

  2. The robot maps the building

    During commissioning, the robot scans the building and creates the map. Cleaning zones are defined on it.

  3. You set the schedule

    In the control platform you choose the zones, times and type of cleaning for each zone.

  4. It cleans on its own

    The robot starts at the set time, returns to its charger by itself and lets you know when maintenance is needed.

Technical specifications

The key figures for RobotClean S1 at a glance.

CE certified: meets European safety and environmental requirements.

Product details

Technical specifications – RobotClean S1
FunctionsScrubbing, sweeping and vacuuming at once
NavigationLaser SLAM + V-SLAM, LiDAR and 3D camera
LiDAR rangeup to 25 m
Laser mappingup to 40,000 m²
Water tank15 l
Scrubbing roller386 mm, absorbent polymer
Maximum suction power250 W
Cleaning speed0.1–0.5 m/s (adjustable 0.2–0.4 m/s)
Minimum passage width900 mm
Battery25 Ah / 38.4 V
Runtimeapprox. 6–10 hours
Charging timeapprox. 6 hours
ChargingAutomatic return to the charging station
SanitisingBuilt-in UVC disinfection
Cleaning routeArc-shaped, along the walls
Dimensions (L × W × H)670 × 490 × 600 mm
CertificationCE

Figures as declared by the manufacturer. Results may vary depending on the floor and settings.

Why RobotClean

You get the robot together with the help you need to use it well from day one.

  • On-site demo

    See the robot working on your own floor before you decide.

  • Commissioning

    We help you map the building and set up zones and the cleaning schedule.

  • Staff training

    Your team learns to use the control platform and handle basic maintenance.

  • Direct support

    Reach us by phone, email or WhatsApp with any technical question, in English, Romanian or Italian.

Frequently asked questions

Short answers to what customers ask us most. Can't find what you need? Write to us.

What does RobotClean S1 do?

It scrubs, sweeps and vacuums the floor at the same time, following an arc-shaped route along the walls that covers the whole area without overlap. It also sanitises the scrubbing module and the floor with UVC light.

How does it navigate and avoid obstacles?

It uses Laser SLAM and V-SLAM for positioning, a LiDAR sensor with a range of up to 25 m and a 3D camera to recognise obstacles. An optical contact sensor stops the robot and changes its direction if it touches something.

How long does it run on one charge?

About 6–10 hours, depending on settings and floor area. A full charge takes about 6 hours, and the robot returns to its charging station by itself when the battery runs low.

How large an area can it cover?

Its laser mapping covers up to 40,000 m². On the same map you can define several zones and different tasks, including on the same floor.

Is the floor wet after cleaning?

No. The 386 mm absorbent polymer roller picks up water as it cleans, so the floor is dry right after the robot passes.

Which floor types is it suitable for?

It is designed for hard floors in commercial and public spaces. For special or delicate surfaces, we recommend a demo on your own floor before you buy.

How narrow a passage can it get through?

It needs a minimum passage width of 900 mm. The robot measures 670 × 490 × 600 mm.

How is maintenance done?

The design is modular: the dust box and water tank pull out easily and the sponge part of the roller is quick to replace. The robot sends alerts about maintenance, faults and parts that need changing.

Can I see the robot working before I buy?

Yes. Fill in the contact form or call us on +40 757 467 775 and we will arrange a demo together.

Let's talk about your space

Fill in the form or contact us directly. The more you tell us about the building, the more accurate our recommendation will be.

We usually reply within one working day.

Send us a message

Fields marked with * are required.

Message us on WhatsApp