Contact

It scrubs, sweeps and vacuums the floor at the same time, following an arc-shaped route along the walls that covers the whole area without overlap. It also sanitises the scrubbing module and the floor with UVC light.

It uses Laser SLAM and V-SLAM for positioning, a LiDAR sensor with a range of up to 25 m and a 3D camera to recognise obstacles. An optical contact sensor stops the robot and changes its direction if it touches something.

About 6–10 hours, depending on settings and floor area. A full charge takes about 6 hours, and the robot returns to its charging station by itself when the battery runs low.

Its laser mapping covers up to 40,000 m². On the same map you can define several zones and different tasks, including on the same floor.

No. The 386 mm absorbent polymer roller picks up water as it cleans, so the floor is dry right after the robot passes.

It is designed for hard floors in commercial and public spaces. For special or delicate surfaces, we recommend a demo on your own floor before you buy.

It needs a minimum passage width of 900 mm. The robot measures 670 × 490 × 600 mm.

The design is modular: the dust box and water tank pull out easily and the sponge part of the roller is quick to replace. The robot sends alerts about maintenance, faults and parts that need changing.

Yes. Fill in the contact form or call us on +40 757 467 775 and we will arrange a demo together.